ash0210
11-18 11:49 AM
Guys/Gals...
We are keeping on discussing, letting out our frustrution in the forum but I feel that "best bet" to come out of this "GC Trap" is to have Premium Processing of I-485 (as I mentioned in my earlier post) by paying extra money to USCIS and/or increase EB visa's to expedite our "stucked" PD's...
We are keeping on discussing, letting out our frustrution in the forum but I feel that "best bet" to come out of this "GC Trap" is to have Premium Processing of I-485 (as I mentioned in my earlier post) by paying extra money to USCIS and/or increase EB visa's to expedite our "stucked" PD's...
wallpaper housewarming invitation card.
jayz
07-17 06:53 PM
While today's development is great news for folks in the 485/AOS cue, what happens with people in CP? With the opening of the floodgates, I am unsure when visas will be available to CP cases who were scheduled for interviews in Aug and beyond. I am a great supporter of today's victory, but I am unsure where CP cases stand now? Another 4 year wait?
Yeldarb
02-05 11:26 AM
Thanks. I'll check it out.
The ball is just a circle with a gradient fill, where the fill is from black at 100% alpha to 0% alpha.
The ball is just a circle with a gradient fill, where the fill is from black at 100% alpha to 0% alpha.
2011 Housewarming Invitation 4
augustus
07-15 07:28 PM
We were successful in getting good media coverage with flower campaign. Our San Jose rally is getting good regional coverage. Yes, we haven't had the expected success with national media yet but we are gaining traction at an amazing pace.
This is not a big corporation with some PR dept. that is working with hundred of employees writing press releases et al. Volunteers like you and me have to take on that action item if you want to see results otherwise please continue on with your discussion
I know we have to do a lot of work to get coverage but I was just saddened at the behavior of the bigwigs. They know the news and yet chose not to report it.
This is not a big corporation with some PR dept. that is working with hundred of employees writing press releases et al. Volunteers like you and me have to take on that action item if you want to see results otherwise please continue on with your discussion
I know we have to do a lot of work to get coverage but I was just saddened at the behavior of the bigwigs. They know the news and yet chose not to report it.
more...
lostcause2007
04-11 05:24 PM
Havent heard about getting visitor visa without appointmment. Might want to talk directly to the Consulate.
digital2k
08-06 12:39 PM
*
more...
learning01
05-25 06:41 AM
and we need to close one, prefererably this one.
2010 You can personalize your cards
katrina
07-21 04:58 AM
As long as you never out of status from the last time you reenter US (Aug 97) you should be OK and should submit your I485
more...
sunderbans
04-07 06:37 PM
Hi
I would like to know what you had filled in DS 160 application. Have you ever been refused visa or admission withdrawn application. Is it Yes or No. My spouse h4 (I 539)was denied as I 94 was expired hence leaving country for H 4 stamping.
Please let me know thanks
I would like to know what you had filled in DS 160 application. Have you ever been refused visa or admission withdrawn application. Is it Yes or No. My spouse h4 (I 539)was denied as I 94 was expired hence leaving country for H 4 stamping.
Please let me know thanks
hair Housewarming Plants
pkak
04-27 04:00 PM
I have still 7 months left over on my 6 year term and they have asked for 3 year extension based on the approved I-140.I'm talking to my company right now and will talk to the lawyer once they receive the denial reason which they should get in 2 -3 days.But my company is ready to appeal.Keeping all this in view if they file for an appeal for what ever reason and based on my visa expirt date which is on 31'Mar 2009 how long will I get to stay and work legally to hear the answer for the appeal??
H1B extension can be aplied only 180 days before expiry of current H1B
H1B extension can be aplied only 180 days before expiry of current H1B
more...
Charleh
05-28 05:14 AM
You can bind them quite easily, assuming your data sources implement the correct interfaces (I believe IBindable/IBindableList).
You would use the metadata table to fill the list for the combobox and then bind the list to the 'degree' fields on your persons table
There are numerous ways to actually accomplish this, I'll run through a straight forward method using the datasource wizard
1. Drop a combobox onto the page
2. Go to the 'Data Sources' window which is usually docked on the left and add a new data source
3. Pick your data provider (I've picked database)
4. Set up your connection to connect to the database. I've just included the connection data in the application for the sake of simplicity
5. Choose the table you wish to bind to - this will be the 'metadata' table with your degrees
6. Finish the wizard, now in the datasources window you should have your table visible.
7. Drag the whole table onto the combobox
8. The program will assign the DisplayMember and ValueMember of the combobox automatically, you can modify it in the combobox properties - the ValueMember is the underlying identifier (the ID column) whereas the DisplayMember is the value you will actually see in the box
9. Repeat steps 1-6 to add your 'persons' table to the datasources window (you can use the same connection as you used before, you won't need to add another)
10. Once you have added the persons table, in the datasources window expand the persons table so you can see all of the actual columns of the table.
11. Find the column you will be binding to (the degree1 column for instance) and drag that onto the combobox.
12. Finished!
Of course you will need to make sure that a certain record from your persons table is selected as the datasource contains a record pointer - you can always drop a BindingNavigator control on there and associate it with the datasource but it does look a bit 'Microsoft Accesss' so I don't use them. Of course you will probably be getting to your persons form via a persons list in the first place so naturally you will be passing in the persons 'ID' and finding that person in the table using the ID
Either way your combobox is bound - your metadata is bound to the item list of the combobox and the persons tables 'degree1' field is bound to the selected value of the box. Visual Studio tends to be quite intelligent in this respect - if you drag a data column onto a bindable control it knows that it should bind the 'value' of that control to the data source. If you drag an entire data table or data container onto the control it knows to bind any 'list' objects to it.
VS 2008 will have already added the necessary code to 'bind' the objects at runtime - check your 'onload' function in the VB code
Of course you've only really got one thing to bind to on a textbox so you get different functionality (with respect though you can actually bind to any property of a control but most of the time why would you want to?)
This is just an example of how to bind to a control - the data exists in memory, so any changes you make won't affect the database immediately. In fact I'm not 100% on how the data gets written back with tableadapters. You may want to read up on them, I usually use custom objects which implement the bindable interfaces.
Edit:
Looks like you can just use the 'Update' method on the tableadapter and pass in the dataset thats automatically defined for you (the dataset will be holding the actual data you are editing). So if you stick a 'save' button on the page and then in the save method call YourTableAdapter.Update(YourDataSource) that should do it - I'll give it a try!
You would use the metadata table to fill the list for the combobox and then bind the list to the 'degree' fields on your persons table
There are numerous ways to actually accomplish this, I'll run through a straight forward method using the datasource wizard
1. Drop a combobox onto the page
2. Go to the 'Data Sources' window which is usually docked on the left and add a new data source
3. Pick your data provider (I've picked database)
4. Set up your connection to connect to the database. I've just included the connection data in the application for the sake of simplicity
5. Choose the table you wish to bind to - this will be the 'metadata' table with your degrees
6. Finish the wizard, now in the datasources window you should have your table visible.
7. Drag the whole table onto the combobox
8. The program will assign the DisplayMember and ValueMember of the combobox automatically, you can modify it in the combobox properties - the ValueMember is the underlying identifier (the ID column) whereas the DisplayMember is the value you will actually see in the box
9. Repeat steps 1-6 to add your 'persons' table to the datasources window (you can use the same connection as you used before, you won't need to add another)
10. Once you have added the persons table, in the datasources window expand the persons table so you can see all of the actual columns of the table.
11. Find the column you will be binding to (the degree1 column for instance) and drag that onto the combobox.
12. Finished!
Of course you will need to make sure that a certain record from your persons table is selected as the datasource contains a record pointer - you can always drop a BindingNavigator control on there and associate it with the datasource but it does look a bit 'Microsoft Accesss' so I don't use them. Of course you will probably be getting to your persons form via a persons list in the first place so naturally you will be passing in the persons 'ID' and finding that person in the table using the ID
Either way your combobox is bound - your metadata is bound to the item list of the combobox and the persons tables 'degree1' field is bound to the selected value of the box. Visual Studio tends to be quite intelligent in this respect - if you drag a data column onto a bindable control it knows that it should bind the 'value' of that control to the data source. If you drag an entire data table or data container onto the control it knows to bind any 'list' objects to it.
VS 2008 will have already added the necessary code to 'bind' the objects at runtime - check your 'onload' function in the VB code
Of course you've only really got one thing to bind to on a textbox so you get different functionality (with respect though you can actually bind to any property of a control but most of the time why would you want to?)
This is just an example of how to bind to a control - the data exists in memory, so any changes you make won't affect the database immediately. In fact I'm not 100% on how the data gets written back with tableadapters. You may want to read up on them, I usually use custom objects which implement the bindable interfaces.
Edit:
Looks like you can just use the 'Update' method on the tableadapter and pass in the dataset thats automatically defined for you (the dataset will be holding the actual data you are editing). So if you stick a 'save' button on the page and then in the save method call YourTableAdapter.Update(YourDataSource) that should do it - I'll give it a try!
hot Housewarming Invitation Card.
la_guy
08-19 01:07 PM
Dr. Chikamarri Ramesh got 10 months imprisonment. He should have been deported.
Citizens of US cannot be deported. That is the LAW... But if that guy had a Green Card or any other visa, then he can be deported...
Citizens of US cannot be deported. That is the LAW... But if that guy had a Green Card or any other visa, then he can be deported...
more...
house Housewarming Invitation Card
GCwaitforever
06-20 03:02 PM
I have EB2 i-140 approved with PD Dec. 05. I am planning to change the employer.. was just waiting to see if CIR gonna help.. but looks like its not. If I change job now, I will have to do labor, i140 once again!! might be able to maintain PD. .. my question is... I believe that in Octo. 06, new quota for GC will be available. What are the guesses that the PD will become current (at least for Eb2 India) in Octo 06?? Some educated guesses are highly appreciated.
The answer to your first question is yes. You can change employers without any impact, by using AC 21 provisions.
Regarding the second question: EB2 India is going to take a long time to come to 2005 PD. I would say, atleast another three years.
The answer to your first question is yes. You can change employers without any impact, by using AC 21 provisions.
Regarding the second question: EB2 India is going to take a long time to come to 2005 PD. I would say, atleast another three years.
tattoo housewarming invitation card.
Berkeleybee
05-24 11:40 PM
We need to get started on this right away and reach Senators before the vote on these amendments take place on May 25, Thursday!
For instructions please see
Web-fax
http://immigrationvoice.org/forum/showthread.php?t=941
Phone campaign
http://immigrationvoice.org/forum/showthread.php?t=942
Thanks,
For instructions please see
Web-fax
http://immigrationvoice.org/forum/showthread.php?t=941
Phone campaign
http://immigrationvoice.org/forum/showthread.php?t=942
Thanks,
more...
pictures This red door flat card is
fxok425
01-09 11:33 PM
EB-2, 485 and 140 submitted in June 2007 concurrently, RD and PD both are June 2007. I borrowed my husband's Swiss nationality. Now 140 approved, AP and EAD got, but NC is still pending.
Just curious: When will USCIS process my 485? According to my nationality or my husband's? If it's mine, god, I may have to wait for 4, 5 years because of the terrible VB backlog! Is it after 485, everyone no matter which nationality, the processing time should be the same. All the world line up together. Please correct me if I am wrong.
Just curious: When will USCIS process my 485? According to my nationality or my husband's? If it's mine, god, I may have to wait for 4, 5 years because of the terrible VB backlog! Is it after 485, everyone no matter which nationality, the processing time should be the same. All the world line up together. Please correct me if I am wrong.
dresses housewarming invitation card
leo_loco
08-07 10:49 AM
As of my knowledge and talking with others, it seems like they will issue receipt to you for each of those application. Regarding I-485 processing, yes they will wait untill your labor substitution is done then they will process I-140 and once I-140 is approved they will process I-485. If I-140 is not approved then they wouldnt be able to process I-485 even if it's current.
I had applied for Labor Substitution/140/485/EAD concurrently on July 2nd. If I understand the process correctly, I would receive 3 different receipt notices and 3 different approvals for LC/140/485?
I have applied in NSC. What is the approximate processing times for approving:
1. Labor Substitution
2. I 140
3. I 485.
Also, will they start processing 485 only after LC and 140 are approved?
Thanks.
I had applied for Labor Substitution/140/485/EAD concurrently on July 2nd. If I understand the process correctly, I would receive 3 different receipt notices and 3 different approvals for LC/140/485?
I have applied in NSC. What is the approximate processing times for approving:
1. Labor Substitution
2. I 140
3. I 485.
Also, will they start processing 485 only after LC and 140 are approved?
Thanks.
more...
makeup Housewarming Invitation 3
Norristown
10-15 11:49 AM
Also carry the proof (H1b receipt notice) that your H1b is applied waiting for the approval and letter from your employer that they have applied for H1 extension.
girlfriend House Warming Invitation PK10
gcisadawg
05-05 04:03 PM
I think other simple RFE is for medicals. We just have to mail the envelope provided by Civil surgeon along with the cover page sent by USCIS as part of RFE.
The cover page they sent us includes
1> Officer #
2> CUD ( They should receive the mail on or before this date)
3> Form # ( I-485, I-140 etc)
4> File #: A # if available
5> Receipt #: receipt # for the form # above
6> Address to which the document should be mailed.
I didn't see any bar code as one poster suggested.
The cover page they sent us includes
1> Officer #
2> CUD ( They should receive the mail on or before this date)
3> Form # ( I-485, I-140 etc)
4> File #: A # if available
5> Receipt #: receipt # for the form # above
6> Address to which the document should be mailed.
I didn't see any bar code as one poster suggested.
hairstyles house warming invitation
ubetman
08-08 10:28 AM
My application has not been sent yet. They are planning to send it to TSC. My confusion is:
According to USCIS website, in I-140 addresses to sent information, for concurrent application of 140/485, it says if the permanent employment is based in this state, it goes to this center.
http://www.uscis.gov/portal/site/uscis/menuitem.5af9bb95919f35e66f614176543f6d1a/?vgnextoid=c31c5cdc2c463110VgnVCM1000004718190aRCR D&vgnextchannel=fe529c7755cb9010VgnVCM10000045f3d6a1 RCRD
In 485 addresses to sent information under employment based category, it says if you live in this state, sent it to this center. This does not say about concurrent filing applications..
http://www.uscis.gov/portal/site/uscis/menuitem.5af9bb95919f35e66f614176543f6d1a/?vgnextoid=eb7b5cdc2c463110VgnVCM1000004718190aRCR D&vgnextchannel=fe529c7755cb9010VgnVCM10000045f3d6a1 RCRD
I live in Texas but in labor employment, permanent job offer address is in diff state which comes under NSC.
Since mine is concurrent filing, I don't know to which center I have to sent the application....Lawyer is saying he will send it to TSC, since I live and work in Texas. But I want to make clear things as I don't want to end up sending to wrong service center. If process delayed, thats fine..but if the application is rejected...then thats a big problem..which is why I am mostly concerned....lawyers r busy..they don't consider all our concerns...in the faqs:pdf released by USCIS, it says if the application is sent by mistake to VSC or CSC, then they will route it to either TSC or NSC but it does not say about if application is sent to TSC but has to go to NSC, it will route it to approriate service center...
tension ...confused....lawyer don't reply...he doesn't care much...
anybody has hotline number to call and confirm with USCIS...thanks in advance..
According to USCIS website, in I-140 addresses to sent information, for concurrent application of 140/485, it says if the permanent employment is based in this state, it goes to this center.
http://www.uscis.gov/portal/site/uscis/menuitem.5af9bb95919f35e66f614176543f6d1a/?vgnextoid=c31c5cdc2c463110VgnVCM1000004718190aRCR D&vgnextchannel=fe529c7755cb9010VgnVCM10000045f3d6a1 RCRD
In 485 addresses to sent information under employment based category, it says if you live in this state, sent it to this center. This does not say about concurrent filing applications..
http://www.uscis.gov/portal/site/uscis/menuitem.5af9bb95919f35e66f614176543f6d1a/?vgnextoid=eb7b5cdc2c463110VgnVCM1000004718190aRCR D&vgnextchannel=fe529c7755cb9010VgnVCM10000045f3d6a1 RCRD
I live in Texas but in labor employment, permanent job offer address is in diff state which comes under NSC.
Since mine is concurrent filing, I don't know to which center I have to sent the application....Lawyer is saying he will send it to TSC, since I live and work in Texas. But I want to make clear things as I don't want to end up sending to wrong service center. If process delayed, thats fine..but if the application is rejected...then thats a big problem..which is why I am mostly concerned....lawyers r busy..they don't consider all our concerns...in the faqs:pdf released by USCIS, it says if the application is sent by mistake to VSC or CSC, then they will route it to either TSC or NSC but it does not say about if application is sent to TSC but has to go to NSC, it will route it to approriate service center...
tension ...confused....lawyer don't reply...he doesn't care much...
anybody has hotline number to call and confirm with USCIS...thanks in advance..
bigboy007
11-03 08:36 PM
But as mentioning is it good to efile or manual filing. as i said this is the case , I have moved after filing 485 my file is at NSC , for CT direct centre is VSC and many ppl have adviced to send file to NSC as my 485 is at NSC. Hence i have decided to file for Manual filing as i am new to Efiling and i dont want it to suggest this to go to VSC which will delay the case ? am i making sense?
Any list for manual filing ?
Checkout : http://immigrationvoice.org/forum/showthread.php?t=14135 (http://immigrationvoice.org/forum/showthread.php?t=14135)
Extract for eFiling EAD:
Covering Letter from the PDF
Covering letter from self
Copy of I-485 Receipt
Copy of approved I-140 (If approved)
Copy of PP (1st and last Page)
Copy of Visa Stamping
Copy of I-94 (Front & Back)
Copy of DL
Any list for manual filing ?
Checkout : http://immigrationvoice.org/forum/showthread.php?t=14135 (http://immigrationvoice.org/forum/showthread.php?t=14135)
Extract for eFiling EAD:
Covering Letter from the PDF
Covering letter from self
Copy of I-485 Receipt
Copy of approved I-140 (If approved)
Copy of PP (1st and last Page)
Copy of Visa Stamping
Copy of I-94 (Front & Back)
Copy of DL
jeda
10-22 07:59 PM
I came to US 10 years ago and moved three times. Never filed AR-11 or change of address with USCIS. Filed for 485 in 2007 July with the latest address.
Will the failure to file AR-11 have any adverse impact on my 485? Should I send in an AR-11 now for the last change of address even though it's late by 2 yrs? I'm very much confused.
If I file the AR-11 now. couple of questions.
1. For the A# in the form, Should I leave it blank?
2. For the section "I work for or attend school at : (Employer name or name of School)"
I will give the employer name. But in address do I give their address or the clients address where I work, My employer is in Texas whereas I'm at the client location in East coast.
Please help...Thank you in advance.
Will the failure to file AR-11 have any adverse impact on my 485? Should I send in an AR-11 now for the last change of address even though it's late by 2 yrs? I'm very much confused.
If I file the AR-11 now. couple of questions.
1. For the A# in the form, Should I leave it blank?
2. For the section "I work for or attend school at : (Employer name or name of School)"
I will give the employer name. But in address do I give their address or the clients address where I work, My employer is in Texas whereas I'm at the client location in East coast.
Please help...Thank you in advance.
Комментариев нет:
Отправить комментарий