Saralayar
08-11 03:43 PM
What exactly does it mean when you say "Use the EAD"? My H1 is valid for next 3 yrs and i dont want to use the EAD (hopefully I'll get it), how do I make sure I dont use the EAD. Does it cause confusion in port of entry when you have both a vlid H1 stamping and EAd and AP?
thanks.
At the time of your entry, if your I 485 is approved, then use your EAD t enter into US. Otherwise, just use your valid H1B visa to enter US.
thanks.
At the time of your entry, if your I 485 is approved, then use your EAD t enter into US. Otherwise, just use your valid H1B visa to enter US.
garybanz
10-28 01:45 PM
You may get your green card with out giving a new set of finger prints. Sometimes, you will get the green card first and then they ask you to give the finger prints if necessary.
In my case, I didn't have to give FP for receiving the physical cards.
How long did it take for you to get the card after the case was approved? Also when your case was approved did the status change to Card production ordered immediately or was there a gap between approved status and card production ordered status?
In my case, I didn't have to give FP for receiving the physical cards.
How long did it take for you to get the card after the case was approved? Also when your case was approved did the status change to Card production ordered immediately or was there a gap between approved status and card production ordered status?
snathan
02-03 02:20 PM
Dude 'Fairlyangel' may be 'Tunnel rat' now posing as an angel . He is trying real hard to show H1Bs as fraud but he himself is faking his identity on IV and doing fraud.
Common, post your real name and real resume if you have any guts. Stop being annonymous if you really want to change the system.
:D:D:D:D
His resume is available at
http://www.itgrunt.com/
Common, post your real name and real resume if you have any guts. Stop being annonymous if you really want to change the system.
:D:D:D:D
His resume is available at
http://www.itgrunt.com/
Berkeleybee
03-27 07:34 PM
Prolegalimmi,
Our team is in contact with NPR. Are you working with sunil on this?
Thanks,
Berkeleybee
Our team is in contact with NPR. Are you working with sunil on this?
Thanks,
Berkeleybee
more...
webm
05-12 10:00 AM
Congrats!! you both..
dask
12-09 03:45 PM
Congrats dask.
Save your congratulations until this neverending and unbearable pain ends....nevertheless many thanks for your congratulatory msg...
Best of luck to u2
~Dask
Save your congratulations until this neverending and unbearable pain ends....nevertheless many thanks for your congratulatory msg...
Best of luck to u2
~Dask
more...
chanduv23
08-03 10:31 AM
The reason they seem to be doing this is because of the kind of recomendations they get from various sources which complain about how the website is not helpful or how it is difficult to track information etc...
One has to understand that such traditional type organizations have their own pace and deal with things in their own way.
The new website may not satisfy applicants but from their POV - they have something better than what they had before and thats how any big organization runs.
One has to understand that such traditional type organizations have their own pace and deal with things in their own way.
The new website may not satisfy applicants but from their POV - they have something better than what they had before and thats how any big organization runs.
aashishkapoor
04-30 04:11 PM
question releated to same issue :
both father and mother has to issue seprate birth affidavit ( I mean on different non-judicial paper affidavit ?
do you know any particular format for this ?
Thanks
both father and mother has to issue seprate birth affidavit ( I mean on different non-judicial paper affidavit ?
do you know any particular format for this ?
Thanks
more...
ramaonline
01-02 01:44 PM
Chk this
http://www.immigrationportal.com/archive/index.php/t-232784.html
http://www.immigrationportal.com/archive/index.php/t-232784.html
chehuan
01-18 02:50 PM
Thanks for the reply
I agree that your suggestion is really smart, I am a QA engineer and I dont know why exactly i wouldnt qualify as EB2....ignore that for now
if i get an I40 with EB3 and move to another EB2 employer
It will result in me losing everything except my priority date
but my employer might not give me any paperwork which is required to retain my priority date which is the case for many employers
in that case I lose everything and need to start from scratch
Am I right?..please correct if not.....What is the nature of paperwork required to retain the priority date?
-chehuan
I agree that your suggestion is really smart, I am a QA engineer and I dont know why exactly i wouldnt qualify as EB2....ignore that for now
if i get an I40 with EB3 and move to another EB2 employer
It will result in me losing everything except my priority date
but my employer might not give me any paperwork which is required to retain my priority date which is the case for many employers
in that case I lose everything and need to start from scratch
Am I right?..please correct if not.....What is the nature of paperwork required to retain the priority date?
-chehuan
more...
abhikal
04-28 06:23 PM
Hi guys,
please help me out. My H1 will expire May 09 (i could claim about 3-4 months outside of india for h1 extension)
My question is if i start my LCA < 365 days from H1b expiry date and get it approved and subsequently file for 1-140 and say 1-140 is not approved, will i get H1 7th year extension?
Thanks for your help and replies
please help me out. My H1 will expire May 09 (i could claim about 3-4 months outside of india for h1 extension)
My question is if i start my LCA < 365 days from H1b expiry date and get it approved and subsequently file for 1-140 and say 1-140 is not approved, will i get H1 7th year extension?
Thanks for your help and replies
dkupadhyay
11-23 12:59 PM
Hi,
I am from India. My previous attorney paper filed my I-140 in Nov. 2006. My new attorney filed I-485 in July 2007. My new attorney has received only the copy of I-140 application and receipt from the previous attorney.
In late 2008, with the help of a congressman, my new attorney was able to figure out that USCIS has lost my original I-140 application (filed at Nebraska center) and USCIS has issued the same I-140 receipt no. to somebody else. Then USCIS auto-created a new I-140 and gave me SRC receipt no. with filing date as Jan 2008 and as electronically filed by my previous attorney.
The new I-140 (SRC one) got approved in March 2009.
Got RFE in August 2009 for my I-485 application asking for the approval notice of my original I-140. My new attorney responded with all the history and the new I-140 approval notice.
Now I have received NOID for my I-485 threatening that if I don't submit the original receipt for the original I-140 then USCIS will deny my application. The USCIS is saying that auto-created I-140 has been filed more than 6 months later than filing I-485 case and can't be the base for filing I-485.
The previous attorney has not provided the original receipt of the original I-140 application and is not reachable via any means (doesn't respond to e-mail or phone calls. Office remains locked whenever I tried to visit him). So getting the original receipt from him is almost impossible. USCIS is not happy with the copy of the receipt.
Right now I don't have any proof (other than copy of the receipt of the original I-140 filing) to support that my I-140 was filed before I-485 filing.
What should I do in this case? Any suggestion will be appreciated.
I am from India. My previous attorney paper filed my I-140 in Nov. 2006. My new attorney filed I-485 in July 2007. My new attorney has received only the copy of I-140 application and receipt from the previous attorney.
In late 2008, with the help of a congressman, my new attorney was able to figure out that USCIS has lost my original I-140 application (filed at Nebraska center) and USCIS has issued the same I-140 receipt no. to somebody else. Then USCIS auto-created a new I-140 and gave me SRC receipt no. with filing date as Jan 2008 and as electronically filed by my previous attorney.
The new I-140 (SRC one) got approved in March 2009.
Got RFE in August 2009 for my I-485 application asking for the approval notice of my original I-140. My new attorney responded with all the history and the new I-140 approval notice.
Now I have received NOID for my I-485 threatening that if I don't submit the original receipt for the original I-140 then USCIS will deny my application. The USCIS is saying that auto-created I-140 has been filed more than 6 months later than filing I-485 case and can't be the base for filing I-485.
The previous attorney has not provided the original receipt of the original I-140 application and is not reachable via any means (doesn't respond to e-mail or phone calls. Office remains locked whenever I tried to visit him). So getting the original receipt from him is almost impossible. USCIS is not happy with the copy of the receipt.
Right now I don't have any proof (other than copy of the receipt of the original I-140 filing) to support that my I-140 was filed before I-485 filing.
What should I do in this case? Any suggestion will be appreciated.
more...
jfredr
07-26 01:49 PM
my colleague whose 485 was mailed on june 27th had his checked cleared yesterday.
ComicDom1
December 21st, 2007, 01:11 AM
First I want to say hello to everyone because I have not been on this site for a while. Second, I want to wish everyone a happy holiday season.
Recently, I have been taking a good hard look at the Olympus E-3. I came to Canon Digital in the early days of the 1D after shooting many different digital cameras including Olympus.
I was well pleased using my E-10, E100RS, E-20, and UZI but when I got the 1D in my hands it was as if a whole new world opened up for me again.
Like many others, I have been following the development of Olympus Camera's. Many of us switched to other brands because we grew tired of waiting for Olympus to produce a DSLR that might be able to compete with the offering from Nikon or Canon. The move to producing a full frame 4/3's sensor was interesting as well. When Olympus finally did release the E-1, it offered a great build including a splash proof body, and some very high quality glass. Unfortunately it lacked in a few area's and although interesting, unless you shot at lower ISO, it was not a camera for people who liked to shoot in low light and sporting events.
I realize, that not everyone has the same requirements for a camera. There are many users the E-1 body worked for. I finally picked one up after the prices fell to a very low point, and I could not resist the deal. I have found the image quality very good if you stay within the limits of the camera.
Finally the E-3 arrived in November and Olympus had made many upgrades in this body. I was very curious as to how competitive IS built in the body of the camera would work. I was also interested in the speed and tracking of the new auto focus system, and if Olympus had really improved on the noise levels of the camera at Higher ISOs. Although many in the Olympus SLR forum at DPR will claim that Noise is no problem at High ISO, my experiences with the camera told me different.
I do have to say, I found the E-3 very well built. The viewfinder is very bright. With the Grip attached, the E-3 felt very similar in my hands to my Canon 1D and 1DMKII.
One of the promises that Olympus made was that the 4/3 system was going to provide us with a smaller lighter Camera body with smaller lenses. While this might be true for some of their mid range cameras, it is certainly not true for the E-3 or E-1 with the grip attached. When sitting on the floor next to my 1D and 1DMKII bodies, I did not find much difference in their size. Lenses might be another story but yesterday, I compared the Olympus 35-100mm to the 70-200 2.8 IS lens and found that the Olympus lens was actually slightly heavier. Unfortunately Olympus has not produced any faster primes like the 85 1.8 of Canon. You really do not have good comparisons of lenses because most of what Olympus produces are variable zooms with the exception of a couple of lenses. Olympus also seems to advertise that they cover the focal length of lenses better than any other manufacturer. Since they include lenses from Sigma and Lecia/pany in this claim, I find difficulty in accepting that. Certainly if I have to consider a lens, I would prefer it was from the maker of my camera, but thats just a personal preference based on past experience.
I do have to give Kudo's to Olympus for improving both the frames per second, as well as the Auto Focus tracking and speed. I found the E-3 will track pretty well in a poorly lit gym. The E-3 also appears to write to the CF card pretty quickly. Why they included a slot for an XD card is beyond me. They would have been much better off to include a slot for the SD cards because of their high capacity.
I also qualified to be an Olympus Global Professional member. What this means is that I can get equipment to evaluate just like what CPS offers. Olympus goes one step further than Canon here because they will even loan you equipment while yours is in repair. So I had them send me a few items to try out. Some of the items I received was the EC-14 tele-converter, 150mm F 2.0, 50mm F 2.0 Macro, as well as a ring flash, and Fl-50R to evaluate. I think I need more time with the FL-50R and ring flash to know how I feel about them.
One of the reasons I wanted the 150mm F 2.0 (effective focal length of 300mm on the E-3) to test is because I wanted to see how it compared in weight and Image Quality to my 300mm 2.8L lens. I also wanted to know how well the E3 in body IS would work with it. Unfortunately I got side tracked because I noticed that my E-3 images contained quite a bit of noise from the images I shot and got consumed looking at that. I can tell you that the 150 and E-3 with grip combination felt very unbalanced in my hands compared to the Canon lens. The 150mm weights 3.4lbs but of course has the effective focal length of 300mm on the E-3 because of the sensor size. If we wanted to compare apples to apples, 300mm to 300mm or actual focal length, we would find that the Olympus 300mm weighs in at a hefty 7.2 lbs compared to Canon's 300mm 2.8 IS lens which is 5.6 lbs. Also the Olympus glass is much more expensive as well.
The problem here is that we are paying more for effective focal length just because the camera sensor is different. So in my view, we are paying more for less in the physical sense.
I mounted the 150mm on a monopod as well. Again compared to the 1D with the 300mm, even though the E-3 combination was lighter, it was not balanced as well and was more difficult for me to steady. I do attribute some of this with me being more experienced with the Canon Gear. There is another issue that concerned me here. I did not feel that the Tripod collar of the 150mm lens was made as heavy or as well as the Canon version.
I am currently going though several hundred exposures I have taken with various focal lengths of Olympus lenses. Since I felt my body has some issues because of noise, yesterday I returned it, the grip, and the 12-60 SWD lens to my vendor. I am waiting now for Olympus to send me another body to try out, so I can find out if it was me or the camera at fault. In the mean time, it seems that my findings are similiar to what Phil found in his DPR review of the new Sony that included the E-3 as well as the D300 and 40D.
In closing, I need to say that this all came about because not only was I interested in the development and capability of the E-3, there were also the noted problems of the 1DMKIII. At this point, I think my 1DMKII will still do nicely for sports. Since I pretty much own the Canon lenses I need, I am considering the 5D, but I want to also give the Olympus E-3 a fair chance, so I am going to wait to see if Olympus follows through on their promise to me.
I also am aware that there is a possibility that a 5D replacement may be announced at PMA next month. Of course I am basically interested in the best image quality, I do not know if I will wait for the replacement. Since the 5D has large photosites, I would think that the replacement would have more pixels so the image quality may be affected.
Thanks for Reading,
Jason
ComicDom1@aol.com
Recently, I have been taking a good hard look at the Olympus E-3. I came to Canon Digital in the early days of the 1D after shooting many different digital cameras including Olympus.
I was well pleased using my E-10, E100RS, E-20, and UZI but when I got the 1D in my hands it was as if a whole new world opened up for me again.
Like many others, I have been following the development of Olympus Camera's. Many of us switched to other brands because we grew tired of waiting for Olympus to produce a DSLR that might be able to compete with the offering from Nikon or Canon. The move to producing a full frame 4/3's sensor was interesting as well. When Olympus finally did release the E-1, it offered a great build including a splash proof body, and some very high quality glass. Unfortunately it lacked in a few area's and although interesting, unless you shot at lower ISO, it was not a camera for people who liked to shoot in low light and sporting events.
I realize, that not everyone has the same requirements for a camera. There are many users the E-1 body worked for. I finally picked one up after the prices fell to a very low point, and I could not resist the deal. I have found the image quality very good if you stay within the limits of the camera.
Finally the E-3 arrived in November and Olympus had made many upgrades in this body. I was very curious as to how competitive IS built in the body of the camera would work. I was also interested in the speed and tracking of the new auto focus system, and if Olympus had really improved on the noise levels of the camera at Higher ISOs. Although many in the Olympus SLR forum at DPR will claim that Noise is no problem at High ISO, my experiences with the camera told me different.
I do have to say, I found the E-3 very well built. The viewfinder is very bright. With the Grip attached, the E-3 felt very similar in my hands to my Canon 1D and 1DMKII.
One of the promises that Olympus made was that the 4/3 system was going to provide us with a smaller lighter Camera body with smaller lenses. While this might be true for some of their mid range cameras, it is certainly not true for the E-3 or E-1 with the grip attached. When sitting on the floor next to my 1D and 1DMKII bodies, I did not find much difference in their size. Lenses might be another story but yesterday, I compared the Olympus 35-100mm to the 70-200 2.8 IS lens and found that the Olympus lens was actually slightly heavier. Unfortunately Olympus has not produced any faster primes like the 85 1.8 of Canon. You really do not have good comparisons of lenses because most of what Olympus produces are variable zooms with the exception of a couple of lenses. Olympus also seems to advertise that they cover the focal length of lenses better than any other manufacturer. Since they include lenses from Sigma and Lecia/pany in this claim, I find difficulty in accepting that. Certainly if I have to consider a lens, I would prefer it was from the maker of my camera, but thats just a personal preference based on past experience.
I do have to give Kudo's to Olympus for improving both the frames per second, as well as the Auto Focus tracking and speed. I found the E-3 will track pretty well in a poorly lit gym. The E-3 also appears to write to the CF card pretty quickly. Why they included a slot for an XD card is beyond me. They would have been much better off to include a slot for the SD cards because of their high capacity.
I also qualified to be an Olympus Global Professional member. What this means is that I can get equipment to evaluate just like what CPS offers. Olympus goes one step further than Canon here because they will even loan you equipment while yours is in repair. So I had them send me a few items to try out. Some of the items I received was the EC-14 tele-converter, 150mm F 2.0, 50mm F 2.0 Macro, as well as a ring flash, and Fl-50R to evaluate. I think I need more time with the FL-50R and ring flash to know how I feel about them.
One of the reasons I wanted the 150mm F 2.0 (effective focal length of 300mm on the E-3) to test is because I wanted to see how it compared in weight and Image Quality to my 300mm 2.8L lens. I also wanted to know how well the E3 in body IS would work with it. Unfortunately I got side tracked because I noticed that my E-3 images contained quite a bit of noise from the images I shot and got consumed looking at that. I can tell you that the 150 and E-3 with grip combination felt very unbalanced in my hands compared to the Canon lens. The 150mm weights 3.4lbs but of course has the effective focal length of 300mm on the E-3 because of the sensor size. If we wanted to compare apples to apples, 300mm to 300mm or actual focal length, we would find that the Olympus 300mm weighs in at a hefty 7.2 lbs compared to Canon's 300mm 2.8 IS lens which is 5.6 lbs. Also the Olympus glass is much more expensive as well.
The problem here is that we are paying more for effective focal length just because the camera sensor is different. So in my view, we are paying more for less in the physical sense.
I mounted the 150mm on a monopod as well. Again compared to the 1D with the 300mm, even though the E-3 combination was lighter, it was not balanced as well and was more difficult for me to steady. I do attribute some of this with me being more experienced with the Canon Gear. There is another issue that concerned me here. I did not feel that the Tripod collar of the 150mm lens was made as heavy or as well as the Canon version.
I am currently going though several hundred exposures I have taken with various focal lengths of Olympus lenses. Since I felt my body has some issues because of noise, yesterday I returned it, the grip, and the 12-60 SWD lens to my vendor. I am waiting now for Olympus to send me another body to try out, so I can find out if it was me or the camera at fault. In the mean time, it seems that my findings are similiar to what Phil found in his DPR review of the new Sony that included the E-3 as well as the D300 and 40D.
In closing, I need to say that this all came about because not only was I interested in the development and capability of the E-3, there were also the noted problems of the 1DMKIII. At this point, I think my 1DMKII will still do nicely for sports. Since I pretty much own the Canon lenses I need, I am considering the 5D, but I want to also give the Olympus E-3 a fair chance, so I am going to wait to see if Olympus follows through on their promise to me.
I also am aware that there is a possibility that a 5D replacement may be announced at PMA next month. Of course I am basically interested in the best image quality, I do not know if I will wait for the replacement. Since the 5D has large photosites, I would think that the replacement would have more pixels so the image quality may be affected.
Thanks for Reading,
Jason
ComicDom1@aol.com
more...
johnnymore
03-18 03:59 PM
I'm a US-born citizen and my dear friend (now my wife) came to US from Thailand on R1/R2 Multiple Entry Visitor Visa for pleasure and to travel around with me to see the US. Though not intending to, we ultimately married while she was here on her visitor visa. See chronology below. We need to file the right forms. Please help me as this is a daunting task. If I can get some questions answered, then it will clear the clouded skies!
We both will be in the US during this process.
Me > :confused:
My Wife > :(
Here is our current situation:
1. I've been back and forth to Thailand for better part of three years for tsunami relief.
2. Met my wife doing relief work.
3. She applied for visitor visa at US Embassy in Bangkok March 2007.
4. Came first time to US May 2007
5. Married in California in July 2007 (had not intended to, but we fell in love!)
6. Returned to Thailand Sept 2007
7. Returned to US (together) Dec 2007 and are here now (March 2008)
8. Have filled out forms:
I-130 Petition for Alien Relative
I-485 Permanent Res/Adjust Status
I-325A Bio for each of us
I-134 Affidavit of Support
I-765 Employment Authorization Note: is eligibility req (c)(9) correct on line 16?
I feel there are no unusual circumstances about us. We are just normal people and don't fall under any asylum, Cuban or otherwise situations. I need to know about filing what forms and which ones together. Also, which ones will require certain documentation and when should they be included. We will likely file the 130/485/325/765 concurrently. What else should we file and what do I not need to file that I've listed?
Please get me going on this and then I can stop pulling my hair out.
I discoverd this forum today and am so happy I've found it! :D
We both will be in the US during this process.
Me > :confused:
My Wife > :(
Here is our current situation:
1. I've been back and forth to Thailand for better part of three years for tsunami relief.
2. Met my wife doing relief work.
3. She applied for visitor visa at US Embassy in Bangkok March 2007.
4. Came first time to US May 2007
5. Married in California in July 2007 (had not intended to, but we fell in love!)
6. Returned to Thailand Sept 2007
7. Returned to US (together) Dec 2007 and are here now (March 2008)
8. Have filled out forms:
I-130 Petition for Alien Relative
I-485 Permanent Res/Adjust Status
I-325A Bio for each of us
I-134 Affidavit of Support
I-765 Employment Authorization Note: is eligibility req (c)(9) correct on line 16?
I feel there are no unusual circumstances about us. We are just normal people and don't fall under any asylum, Cuban or otherwise situations. I need to know about filing what forms and which ones together. Also, which ones will require certain documentation and when should they be included. We will likely file the 130/485/325/765 concurrently. What else should we file and what do I not need to file that I've listed?
Please get me going on this and then I can stop pulling my hair out.
I discoverd this forum today and am so happy I've found it! :D
rbharol
08-22 02:14 PM
Any US postgraduate degree + 3 years prior to I-140/I-485. Read the text of the bill for more details.
Thanks. Moreover the fact that the unused visas shall be carried forward too should help.
Specially the ones unused from 2001 to 2005.
Does anybody know was is the number of unused visas from 2001 to 2005.
Thanks. Moreover the fact that the unused visas shall be carried forward too should help.
Specially the ones unused from 2001 to 2005.
Does anybody know was is the number of unused visas from 2001 to 2005.
more...
485Mbe4001
10-08 12:54 PM
SS tax has a cut off after a certain income level. The current SS is supporting the baby boomers and it is projected that in its current state by 2017 the current SS deductions will be less that the outflow. SS is marching towards a disaster.
PF is put in our own account, you get back what you put in along with interest. My company in india used to give a 100% deduction match, most s/w companies do the same. The amount that is put in PF will never go down as the interest rates are set by the government (inflation is a different story). IMO it is much better than social security.
There is no totalization agreement between US and India, its one of the reasons we will never see our SS contributions unless we work for 10 odd years or get that damn GC. This law is for employees from indian companies who used to come to work on short term projects.
Isn't this exactly what we have to go thru here in US by paying SS Tax?
PF is put in our own account, you get back what you put in along with interest. My company in india used to give a 100% deduction match, most s/w companies do the same. The amount that is put in PF will never go down as the interest rates are set by the government (inflation is a different story). IMO it is much better than social security.
There is no totalization agreement between US and India, its one of the reasons we will never see our SS contributions unless we work for 10 odd years or get that damn GC. This law is for employees from indian companies who used to come to work on short term projects.
Isn't this exactly what we have to go thru here in US by paying SS Tax?
CADude
04-07 11:01 PM
My H1B job requirement is similar but not 100% same to GC Labor. Attorney said it can be different.
thnx CADude... did you had to provide job description used in your labor or your last H1? if not then did the new employer used their own description?
thnx CADude... did you had to provide job description used in your labor or your last H1? if not then did the new employer used their own description?
gccube
04-23 11:44 PM
Please see my signature for details. Good luck to all of you.
papajon
06-18 02:20 PM
I received the very heartbreaking news that my EB3 PERM application filed OCT 2007 (with audit) was denied. Audit was requesting a copy of the Newspaper AD which the lawyer sent last NOV 2007. Reson for denial was because the copy that the DOL recieved was not clear and some words as part of the Newspaper name was missing.... An appeal will be filed soon.
Any suggestions from the gurus?
I have bachelors with more than 5 years of experience, is it adviseable to file new PERM under EB2 category?
For people who filed motion or an appeal, could you please post your feedbacks/experiences?
also, im on my 7th yr extension and it will expire on FEB2010... will I have problems with my extension?
Any suggestions from the gurus?
I have bachelors with more than 5 years of experience, is it adviseable to file new PERM under EB2 category?
For people who filed motion or an appeal, could you please post your feedbacks/experiences?
also, im on my 7th yr extension and it will expire on FEB2010... will I have problems with my extension?
guesswho
10-09 10:59 PM
I am planning for my visa in Jan at Mumbai consulate. I do not have any relatives in either mumbai/pune who can submit my documents 3 days before the appointment.
Has anyone faced this issue? I have sent them an email asking if I can mail the documents to them. Lets see what they reply. Does anyone has experience what to do in situation like this?
Thanks
Has anyone faced this issue? I have sent them an email asking if I can mail the documents to them. Lets see what they reply. Does anyone has experience what to do in situation like this?
Thanks
Комментариев нет:
Отправить комментарий